Ikea Ribba Picture Ledge

During a late night Pinterest binge I came across a wall of frames, with some of the frames sitting on a picture ledge. It looked awesome and would totally transform the boring wall behind our oversized sofa.

 

IMG_4437

 

I remembered seeing a wall display at Ikea that had a ledge from the Ribba collection, so off to ikea.ca to see if it still existed.. score! This was now my next DIY project! Poor Marc…

 

My dilemma – my sofa is oversized and the ribba ledge (even the largest one available) isn’t very long.  I centered it above the sofa and it was ackward and just not what I was looking for.

 

 

IMG_4440

 So I  harrassed a few friends and did some more Pinterest browsing and came across this image and my inspiration was born!

 

 

 

 

 

 

My brilliant idea? Have it centered on the 2nd half of the wall and hang one of my existing larger frames on the 1st half.

So on a rainy October Saturday while Marc was away, I secretly took out his stud finder, level and new cordless drill. I hung the shelf, felt REALLY friggin proud and then put his tools away neatly ;)

Then I went to Homesense.. DUH.. I found the most awesome gold/bronze vintage looking frame, a new white frame that had a different thickness than the existing Ikea Ribba frames to add texture/contrast.

I ordered prints of several of my pictures and patiently waited. I ran out of patience about 10 minutes later so I dug up existing prints to test what size and shape prints I wanted in each frame, and did I want black & white or color. Without really thinking, I put up old pics of Talie and some sleepy Sasha prints. Marc came into the room and made a comment that it was a “Talie & Sasha” wall – GENIUS!

My new prints arrived, a new (final) frame purchased, some cutting, making mats and inserting pictures and I’m in Love with how it turned out.

IMG_4558IMG_4559

 

 

 

 

 

 

 

P.S Playing with pictures of Talie was a bit sad, I miss her every day. But Sasha has started sleeping in her spot, next to me in bed, and that helps…

 

 

 

 

 

 

 

 

 

 

 

DIY “Floating” Bathroom Shelves

Last March when I painted the bathroom, I was inspired to create 2 wall to wall floating shelves that I had seen on Pinterest.

After a month of deciding how thick I wanted them, and sourcing wood that wouldn’t cost a fortune, I got sick with pneumonia and just put all my DIY projects on hold. By mid July I was almost all better and started planning the shelves again. By then I changed my mind with the original design, the bathroom is so small, I didn’t want thick bulky shelves. I had such great success with the Ekby Bjarnum brackets from Ikea,

IMG_4286

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

but Ikea’s shelves are silver, white, birch or black/brown and I reallllllly wanted wood shelves that I could stain that rustic grey/brown color I was dreaming of since March.

So I started sourcing wood AGAIN, this time I needed wood that was 1″ finished, and most of the wood you find is 3/4″ finished. I finally found what I wanted at Home Depot, an 8′ X 1 1/2′ piece of unfinished pine. Since it didn’t go through the planer, it was 1″ thick! Woohoo! plus it had that rustic, knotty feel to it and at $20 for the piece, it was a steal. So with the 2 sets of Ikea brackets at $10 each, the stain and protectant at $10 each, this was a $60 project.

Now to make the shelves! Marc used his circular saw to cut the shelves to the right length and then I sanded them, to remove some of the roughness.

IMG_4279

IMG_4280

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

After that we drove the shelves to my parents and Marc cut them to the correct width using my dad’s table saw.

I then resanded them with a finer grit, washed them clean with a damp dish rag and stained them. I used Saman stain and mixed “Urban Grey” with “Cocoa” to get the perfect chocolate/grey color I wanted. After the stain was dry, I used the same grit sand paper and hand sanded to add some of that rustic look I wanted.

IMG_4287

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I wiped them clean again and applied 2 coats of satin finish water based varnish using a foam brush.

IMG_4291

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

We waited a few hours and installed them. I LOVE how they turned out! I still have quite a bit of “dressing” to do, which involves more shopping ;)

Here they are finished, with close up’s of the actual stain color.

IMG_4293 IMG_4294 IMG_4296

(a little early) DIY Halloween Feather Owl Wreath

While browsing pinterest for a fall wreath idea last year, I fell upon a feather wreath that someone pinned that was being sold on Etsy for a crazy high price. But it got the hamster in my head going and I came up with what I think is an even better totally awesome wreath and it’s totally affordable.

I picked up a vine wreath at Michaels using my weekly 40% coupon, so it cost me around $12.00 cdn (I got the biggest wreath that would fit my front door)

IMG_2443

For the feathers, I picked up black feather boas from the dollarama for $2.50 each (I ended up needing 6 for this size wreath). I tied a fairly thin beading wire to the loop at the end of the boa and secured it to the inside of the wreath and started wrapping the boa tightly around it. I tied each boa together with the same wire, as I went, wrapping it tightly so you can’t see any vine peeking trhough.

IMG_2444

While at Michaels I looked through their halloween decor for inspiration and found a black feather owl, a really cute Trick or Treat sign, a blinged out spider and the all important black striped wired ribbon.

I attached the Trick or Treat sign using wire (again) and then I made a large bow with the wired ribbon and I hot glued the spider to the center of the front of the bow. I also threaded a piece of wire through the center of the bow and attached it to the wreath.

IMG_2449

For the owl I attached it using a crap load of hot glue.

photo 3-11

To hang it on the door, I picked up a  wreath hook from dollarama and after hanging the wreath on it, I hot glued it to the wreath so it would stay in place (we get crazy wind on our street). Voila, a kick ass amazing wreath that people will think you paid ALOT of money for and won’t believe you actually made!

IMG_2448

Ikea Hack – New mini side table

Our living room needed a small side table (and I mean small) for drinks.

Everything I found was too big and too expensive. I REALLY REALLY REALLY wanted a table with hairpin legs but those damn things are expensive. $90 for 4 legs … that money would be wasted on this project, it wouldn’t give the legs justice. So now I need to find a place in the house for those legs with a new project… but back to this project.

IMG_4120

My problem solving/creative brain kicked in and with pinterest and google images and Ikea, I realised I needed to think outside the box.. find something that wasn’t a table, and turn it into one.

Man those hairpin legs.. urgh I need to find a place for them..

So I fell upon a stool in the ikea catalogue that was the perfect size and height! Except, WTH, it ONLY comes in neon yellow or neon orange!? but at $19.99 it was a steal cause there’s nothing a handy can of krylon can’t fix. 

IMG_4121

 So I settled on the neon yellow, I figured it would be easier to cover in white than that weird neon orange. (I’m pretty sure I was right)

Since it comes un assembled, it was a super easy project. I painted the top of the new “table” a high gloss white using a can of Krylon that I picked up for $6.95.

IMG_4122

 Sasha and I waited for it to dry …

IMG_4124

 When it was finally dry, I attached the legs and I ADORE IT!!!

IMG_4125

The legs are unfinished so I’m left with the option of leaving them as is or staining them a dark grey/brown. I’ll sleep on that one for a while..

If you can’t find what you are looking , look at other things with similar shapes/sizes, you’re sure to fall on something that can work and don’t be scared to paint it!

XO Talie & Sasha